The name Labgear has been associated with quality signal distribution since 1932 and the current range of amplifiers continues to uphold that tradition. All LDL amps can carry analogue and digital TV and radio, DAB, Freeview, DVB-T and DVB-T2 HD TV signals and have:
- More efficient Switch-Mode Power Supplies which run cooler
- Improved gain flatness delivering a better balance across the performance range
- Lower noise figure for optimised signal quality
- Greater signal handling capacity to cope with more channels
- Better impedance matching and therefore improved signal transfer from amp to cable
- Labgear amplifiers use F-type coaxial connectors for better matching and security
This fully screened aerial amplifier features separate inputs for VHF (Band III TV, FM and DAB digital radio) and UHF (Freeview, DVB-T and DVB-T2 HD digital TV) and also has
an IR return path to enable channel changing from remote locations and are compatible with Labgear and other Digilink remote control systems.
This makes it ideal for use in Sky™ digital satellite home installations, where the output from a digibox can be distributed to several rooms with the capability for full remote control of the Sky™ box from these rooms.
The LDL amplifiers are compliant with the Radio Equipment Directive 2014/53/EU and meet harmonised standard EN 303 354 for product Type D Class 0, they are suitable for digital TV signal distribution of Ch21-60 from a receiver or from an aerial fitted with a 4G filter in the UK and EIRE.
Features:
- Dual input amps, VHF 87-230MHz, UHF 470-790MHz
- Distribute signal from your digibox or *TV and radio aerial
- 9V DC on every output to power DigiLink eyes
- Return path for IR control
Specification
- Number of inputs 2
- Number of outputs 8
- Frequency range 87-230 & 470-790MHz
- Gain 10dB
- Noise Figure Typ. <4dB
- Max output level (IMA3 -60dB) 86dBμV
- Isolation between outlets 20dB
- Return path range 5-30MHz
- Return path gain 6dB
- Power for DigiLink eyes 9V 15mA short circuit protected
- RED, EMC and LVD Compliant
- Power required 220-240V~50/60hz <3W