The Avant 9 unit is a programmable multiband amplifier, which main mission is
to achieve a programmable amplification and balance of different RF input
signals.
• UHF inputs: the channels present inthese i nputs can be filtered and
adjusted using up to 10 filters. Each filter can be tuned on any of UHF channel
(21 to 60) and its bandwidth can contain up to 7 channels. The disposition of
these 10 filters is configurable based on the number of channels present on
each UHF input.
The output level is programmable between 100 and 115dBµV for one-output
options (BASIC and PRO), and between 96 and 111dBµV for two-output options
(BASIC SAT and PRO SAT). Furthermore, an equalization slope of up to 5 dB can
be programmed at the output.
• You can choose whether to enable an FM input or not. Should this input be
enabled, it will be amplified and its output level set to 10dB below the
lowest-level UHF channel (taking into account the equalization slope).
• VHF input: a VHF input can also be enabled. But in this case, its signal
level will be 3 dB below the lowest-level UHF channel.
• IF input: satellite input can be assigned an attenuation between 0 and
30dB, and an equalization between 0 and 15dB. The LNB can be configured to be
REMOTELY (user STB) or LOCALLY powered by enabling the 22kHz tone and
configuring the supply voltage value to 13V or 17V.